Skip to content

Welsh Centre for Printing and Coating

Search the website
Menu

Agenda

Session 1 – Battery Technology
09:00 – 09:20

Introduction

Introduction to STREAM/Introduction to ACNM

Prof David Gethin

David Gethin/Glyn Davies

09:20 – 09:50 Formulation of NASICON as a solid electrolyte for a sea water open cathode battery. Amir Jalalian-Khakshour.  Presented By Davide Deganello
09:50 – 10:20 Investigation of carbon coatings to function as protective layers for current collectors Brent de Boode. Presented By Davide Deganello
10:20 – 10:50 Refreshment Break  
Session 2 – Rheology Characterisation
10:50 – 11:10 The effects of plasma functionalization on the print performance and time stability of graphene-nanoplatelet inks Andrew Claypole
11:10 – 11:30 Using advanced rheology to link mechanical properties of model screen inks with print outcome Alex Holder
11:30 – 11:50 Control of flexographic print properties through tailored ink rheology Miles Morgan
11:50 – 12:10 Testing of flexible printed wires for wearable technology James Claypole
12:10 – 13:10 Lunch
Session 3 –  Printed Sensors
13:10 – 13:30 The application of smart packaging in the food industry for spoilage detection and extended shelf life in high value food products Caitlin McCall
13:30 – 13:50 Development and evaluation of low-cost solutions for urban air quality management Sam Lewis
13:50  – 14:10 Aerosol jet deposition of printed electronics Ben Clifford
14:10  – 14:30 Hybrid coatings based on nanocellulose/silver nanowires to develop barrier and antimicrobial properties for active packaging applications Hugo Spieser,  Presented by David Gethin
14:30 -14:50 Refreshment Break  
Session 4 – Functional Printing
14:50 – 15:10 Interaction of Formulation with the Performance of Functional Inks and Resins David O’Connor
15:10 – 15:30 The effect of screen printing parameters on print quality Sarah-Jane Potts
15:30 – 15:50 Technical validation and feasibility of combined planarising and insulating intermediate layers for BIPVs Tatyana Korochkina
15:50 – 16:10 Expanded Gamut Optimisation for UV Flexographic Inks Andrea Greenacre
16:10 – 16:30 Close  

Scroll Up